Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[niceone]

wanted a MILD LOAD FOR A 20 TAC with 32 or 40 v max oh i have some RL10X

[stevec]

My 20Tac loves 24.6gr of H322 and 40gr Bergers.

Steve

[bibsmachine]

Hey! Niceone I use 25.5 h322 with 32 gr. vmax. shoot very good.

[Recko555]

32s => 25.0 RL10x
40s => 24.6 RL10x

I use this in my 20 Practical

[jordang]

23 gr of N133 over 40 gr  matey 

gives roughly 3600 fps

[MOlson]

24gr RL10X is mild and extremely accurate in my 20TAC

[redbang]

32s => 25.0 RL10x
40s => 24.6 RL10x

I use this in my 20 Practical

What speeds are they doin Recko ? My 20 Prac is being built now, and I'm looking for load info too.
                                  Cheers, Red.

[Recko555]

32s => 25.0 RL10x........chrono at average of 4020 fps
40s => 24.6 RL10x........I haven't chronoed, but I am estimating around 3800-3900 fps.

[redbang]

32s => 25.0 RL10x
40s => 24.6 RL10x

I use this in my 20 Practical

What speeds are they doin Recko ? My 20 Prac is being built now, and I'm looking for load info too.
                                  Cheers, Red.

. . . and I forgot to ask, what barrel length and twist ? Thanks, Red.

[kapac]

I have been using 2230 in my 20Tac, I will not be able to get the speeds you guys are getting no matter what powder I use cause I built my custom barrel for my Contender. Its a great little handi rig. I have it set up for the berger 50's but could get the speeds I thought it should be getting. Now I am using the 40 V-Max and 2230 powder and getting around just under 3700fps!! I am starting to have some pierced primers using BR/Match primers so I think I will start over with the load data and use some small mag primers.

I have wanted to try some other powders to try to fill the case to make it a little more productive but just have not changed yet since I have a 8lber sitting the reload room.

Kapac

[Recko555]

24" barrel.  This is on a AR platform.