Greg Tannel Gunsmithing DVDs

Greg Tannel, owner/operator of Gre-Tan Rifles and GTR Tooling, is a renowned gunsmith and one of the most respected machinists in the business. He invented, and now builds, many of the advanced tools used by other gunsmiths, such as the GTR high pressure pump for chamber flushing systems.

Greg Tannel Gunsmithing Videos

CLICK HERE for Gre-Tan Gunsmithing DVD Order Page. Call (970) 878-5421 for more info.

Greg has created a series of high-quality DVD videos sharing his knowledge of advanced gunsmithing topics. These DVDs range in length from 50 minutes (Tailstock Alignment) to a full 4 hours for the 2-disc Action Blueprinting DVD. All the videos are available from Greg in modern DVD format that can be played through either your television set or your home computer. Here are the gunsmithing DVDs currently offered:

Action Blueprinting: 2 DVDs / 4 Hrs. $58.00 delivered.
Greg notes: “No other video ever made comes close to this Hi-tech, in-depth look at what is involved to blueprint an action. This video is not candy-coated. It reveals the inherent gross misconceptions of action truing with facts and dial indicators. All machining is single point, including the recutting of the threads. This includes an in-depth instruction section on setup of the threading tool bit and how to pickup the internal thread in an action for recutting for professional truing of threads.”

Bolt Sleeving Video: 2 DVDs / 2 Hrs. 30 mins. $55.00 delivered.
This video starts by showing bolt lug deflection off of the receiver lug. This will open your eyes. Next the use of the action bolt bore reamer/mandrel is shown and demonstrated on an action that is being blueprinted. Then the nitty gritty of sleeving a bolt body is presented. All setups for machining are shown from the start to finish on the bolt.

Tailstock Alignment For Reaming: 1 DVD / 50 mins. $41.00 delivered.
This video shows how to dial in the tailstock and explains why the turning of a shaft for alignment may be fighting and ruining all your chamber reaming efforts.To achieve repeatability when moving the tailstock for depth of cut, like head space readings, the tailstock has to come back into axial alignment when slide back up the barrel for resuming the reaming operations.

Sako Extractor Install: 1 DVD / 1 Hr. 59 mins. $25.00 delivered.
This video covers installation of all styles of Sako extractors. It also covers set up and machining of the bolt for the SAKO extractors.

G.T.R. High Pressure Pump: 1 DVD / 2 Hrs. $31.00 delivered.
Whether you purchased a flushing system from G.T.R. or built your own. You will want this full information video, which will save you time & money. All important matters concerning chamber flushing are covered in detail.

Tags: , , , , ,